1 of 6

Write now Article Tools

Page 2 of 2

to look more like an incandescent bulb in exposed uses. Regardless of the type of look chosen, the consumer should look for the EnergyStar logo, which indicates that the bulb uses approximately 75% less energy than standard incandescent bulbs, starts in less than one second, and does not flicker.

The next criterion is wattage. Wattage refers to the energy consumed by the bulb, although it is often used to estimate the brightness of the bulb by the consumer. Incandescent bulbs are typically purchased between 40W and150W, for most home use. To get a comparable output from a CFL, a 40W incandescent bulb should be replaced with a 7 or 11W CFL. A 60W incandescent should be replaced by 13 or 15W CFL, and a 100W incandescent should be replaced by a 26 to 29W CFL.

The last factor to consider is the color of light, which is described as color temperature, measured in Kelvin (K). Most CFLs for home use come in four types. "Soft white" or "Warm white" CFLs emit less than 2700K, and produce the yellow light that most people associate with incandescent bulbs. "White," "Bright White," or "Medium White" CFLs emit 2900 to 3000K, and give a less yellow, whiter light. "Cool white" CFLs, at 4000K, give a slightly blue light, and "Daylight" CFLs, at more than 5000K, produce the bluest, or "coolest" light. The names and measures used are not completely standardized among producers yet, and the Kelvin value is not always printed on the package, but this is starting to change, so careful inspection of the package will allow most consumers to purchase the "color" of light bulb they desire.

Many people are concerned about the mercury contained in CFLs. Environmentally, CFLs are superior to incandescent bulbs. The amount of mercury released into the air from coal burning power plants to power an incandescent bulb is far greater than the amount used to power a CFL, even after adding in the mercury contained within the bulb itself. If a bulb breaks, the fragments and particles should be swept up using a broom, never a vacuum, and then placed in a sealed plastic bag. A damp paper towel should be used to wipe down the area and sealed in the bag as well, and the room should be ventilated. Broken or dead CFLs, like paint, batteries, thermostats, and other hazardous waste, should not be incinerated. Local waste management in many areas provides hazardous waste pickup. If this is not available, and the garbage is not incinerated, then CFLs may be sent out with the household garbage in a separate sealed plastic bag. Alternatively, some stores, such as IKEA, now provide CFL take back programs, and recycling programs for CFLs exist in some locations.

Switching to CFLs is now easier and cheaper than ever. They save the consumer time and money, and if widely adopted will create a dramatic drop in pollution. While CFLs are not yet available for all applications, the average homeowner can find at least three fixtures in the home where CFLs can be used, and reap the benefits.

Learn more about this author, Tamara Kelly.
Click here to send this author comments or questions.

• << previous page
• 1
• 2

Add your voice

Know something about Buyer's guide to compact fluorescent light bulbs (CFLs)?
We want to hear your view. Write now!