There are several types of saws available on the market. But a miter saw is a saw that operates with rollers and uses replacement blades. The first ever released miter saw was manually operated and over time has been replaced by an electric powered miter saw.

A miter saw is used generally for making crosscut or miter cuts accurately. Such cuts are generally seen in the making of picture frames. The miter saw is used mainly in carpentry and for joining operations.

You must first know how to operate a miter saw and how to keep yourself safe during operations. Here are some steps for operating your electric powered compound miter saw properly.

First, you must set your fence to the desired cut angle of your projective cut. You can swing the table to change the angle of the blade to cut against the fence. Most all compound miter saws have a semicircular table designed for the purpose of moving for each different degree cut setting.

Next, you want to lock you angle after you have it set to your desired angle. There is either a lever or a screw that will aid in locking in your degree angle. The locking of the angle is to prevent the fence from shifting during the angle cutting process. This will also aid in preventing accidents associated with the miter saw.

Now, it is time to adjust the tilt of your saw. To check your cut angle you want to perform a test cut. Be sure and wear protective eye wear and keep your hands out of range of the moving blade. Once your test cut has been preformed and meets your standards then you can continue with your original project.

If your test cut is not to desired angle or standards reset your tilt and blade angle till you have a cut you want.

For best results never slam your saw body. You must start the saw blade into motion and allow it to build up to full speed. Once at full speed then, lower your blade and allow the saw to do the work for you. Never force the material into the saw blade. Doing this can damage the miter saw and could cause bodily harm. And it can also damage your wood working project as well. Always have your saw properly mounted on a solid, sturdy, and flat surface.

As always with any power tool educate yourself on proper operations and wear protective equipment. Even the most experienced miter saw operators can learn new techniques for safer operation. Never operate any power tool without reading and understanding how to operate properly.

Learn more about this author, A.L. Lovern.
Click here to send this author comments or questions.

---

Add your voice

Know something about How to use a compound miter saw?
We want to hear your view. Write now!