1 of 1

Write now Article Tools

Page 2 of 2

touching the sensor, you're more likely to scratch it. However, many people use this method and have no problems with it. There are several types of kits for you to choose from, but one of the more recommended kits is made by Eclipse. It usually will consist of sensor swabs, pads, a wiping cloth, and some fluid.

Again, to use the wet technique, you'll need to turn off your camera. Mount it on a tripod to keep the camera steady, and make sure you're in as dust free of an environment as possible (like a bathroom). Then remove any lenses on the camera, and expose your sensor. There's no need to point the camera downwards this time because you'll need to see the camera sensor. After this, take one of your sensor swabs and apply some Eclipse fluid to it. Then gently wipe it across your camera sensor on one side, and then turn your sensor swab over. Go back in the opposite direction with your sensor swab, and you're done. Keep in mind that it may take multiple cleanings for this to work.

Use a Brush -

To clean your camera sensor with a brush, you'll again need to follow those same steps that were utilized in the wet technique. Place your camera on a tripod, turn it off, remove your lens, expose the camera sensor, and begin the cleaning. Simply wipe the brush gently across your sensor, and when you're satisfied stop.

You should be able to see if you were successful or not. But what type of brush should you choose? Some people will go the cheap route, and buy an inexpensive brush. And others will spend a lot of money. Either one may work. Whatever you decide on, just make sure that the brush has been specially designed for a dslr camera sensor. If it isn't, you might have to send your camera in for repairs. Damages could cost you a few hundred dollars or more.

Use a Professional -

Sometimes the above techniques will still not remove the dust, or perhaps you just don't want to do it yourself. After all, most dslrs are rather expensive devices that nobody wants to damage. When a professional cleans your camera, you will usually pay a hefty price for the cleaning. However, sometimes people find places that will clean your camera for free. But you can usually expect to pay between twenty-five and one hundred dollars. And usually, the professional does a good job. Unfortunately, sometimes this is not always the case. So be sure and check your camera for dust spots when you reacquire it.

Cleaning your camera sensor is a delicate process that terrifies many photographers. However, if you take the proper precautions then you will likely be just fine. But remember, there's always a slight risk when you do clean the sensor.

Learn more about this author, Aaron Conor.
Click here to send this author comments or questions.

• << previous page
• 1
• 2

Add your voice

Know something about How to clean your DSLR camera sensor?
We want to hear your view. Write now!